Error code 0x800f081f occurs while installing .Net Framework 3.5 using installation wizard, Deployment Image Servicing, and Management (DISM) tools or PowerShell commands. Another reason for the occurrence of error code 0x800f081f due to a configuration issue. In Windows 10.Net Framework 3.5 comes up with OS component which isn’t enabled by default. This error code is one of the possible errors which indicate.Net Framework 3.5 incompatibilities. The other three error codes are -0x800F0906, 0x800F0907 and 0x800F0922. Many windows users are reporting to this error because it’s really distressing to receive a message which says, “Windows couldn’t find.Net files.” Some users also reported to trying to install Windows Updates for .NET FRAMEWORK 3.5 and each time the computer restarted with a Blue Screen of Death.
So, if you’re getting this message along with an error code 0x800f081f, then you need to follow the below-mentioned methods to resolve the error instantly.
(Note: Before performing the troubleshooting steps make sure to temporarily disable both Antivirus and Firewall and check if you are able to install the updates.)
Methods to fix error code 0x800f081f in Windows 10
Basically, there are different methods to fix them .Net 3.5 error code 0800f081f which should be performed carefully and one-by-one. You can also solve the other three aforementioned errors in the same way. Follow the below-mentioned methods to fix the error:
METHOD 1 – Configuration Policy
The error code 0x800f081f in windows 10 might occur due to disabled group policy in the component set. To address the issue, just follow the below-listed steps carefully:
Step 1: First, press windows key + R button and select Run.
Step 2: Now, simply type “gpedit.msc” in Run and press the “OK” tab.
Step 3: Afterwards, local group policy editor will get open and then, select Computer Configuration > Administrative Templates > System.
Step 4: Now, search for “Specify settings for optional component installation and component repair” on the right-hand side and double-click on it. Now, settings option will get open.
Step 5: After opening the settings window, select the ‘Enabled” option and press “OK” button.
Step 6: Finally, try installing them.Net Framework 3.5 and check if the error appears again.
Method 2 – Enabling Of.Net Framework 3.5 Feature Through DISM Command
To make this step work you will need a copy of the Windows installation media. However, before we begin with this step, we shall run a system scan on the computer and check the integrity of the file. To begin, Run the Windows Update (temporarily disable Windows Security) and make sure all the latest updates are installed in your computer. Now open the command prompt and make sure to run the CMD window as an administrator. Type ‘sfc /scan now’ and hit Enter.
There’s a possibility that.Net Framework 3.5 isn’t enabled in your operating system. Therefore, in this method, you can enable it by using the DISM command. To begin with this method, you need to install windows installation media or ISO image to perform the actions. Some crucial steps are mentioned below to enable.Net Framework 3.5 by DISM command:
Step 1: Mount the windows installation media or ISO image in your operating system.
Step 2: Now, click on the windows key and type “cmd.”
Step 3: Then click on the “command prompt” and select the first option “Run as Administrator.”
Step 4: After opening the command prompt window, type the following command:
DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:<>:\sources\sxs
Step 5: Now, press the “Enter” key.
Step 6: Lastly, install them.Net Framework 3.5 and check if the error disappears.
METHOD 3 – Installation Of.Net Framework 3.5 Using Windows Powershell
Before, we begin with this method we need Windows Installation Media to perform the required action. Follow the below-listed steps to install.Net Framework 3.5 using Windows PowerShell:
Step 1: Mount the Windows Installation Media or ISO image in your system.
Step 2: Now, click on the windows key and type “PowerShell.”
Step 3: Then right-click on the “Windows PowerShell” and click on “Run As Administrator.”
Step 4: Afterwards, type the below mentioned command and press the “Enter” key
Enable-WindowsOptionalFeature –Online –FeatureName “NetFx3” –Source <>:\sources\sxs –LimitAccess
Step 5: Finally, check if the error disappeared or not.
METHOD 4 – Removal of .NET FRAMEWORK 4.7 from the Windows Features and then Installation or Reinstallation of .NET FRAMEWORK 3.5.
Apply this method only if you come across the error code 0x800f081f.
Step 1: To remove the .NET FRAMEWORK, Click on Start Menu and Open Programs and Features. From the list of programs, go and double-click Turn Windows features on or off.
Step 2: Windows Features window will pop up, uncheck the box on the .NET Framework 4.7 checkbox and hit OK to auto uninstall all the latest downloaded and installed version of NET FRAMEWORK.
Step 3: After the uninstallation is complete, check the .NET Framework 3.5 checkbox and hit OK
Step 4: This will allow the system to automatically download and install the .NET FRAMEWORK 3.5. Simply follow the instructions provided on the screen to download and install the .NET FRAMEWORK 3.5.
Step 5: If the .NET FRAMEWORK 3.5 installation is successful without any errors, then enable the NET Framework 4.7 again.
In the end, hopefully, the aforementioned methods helped you to fix the error code Ox800F081F easily and make all of your installation work done. By working this .NET FRAMEWORK, it will help you to access a number of software applications and it will not damage your Windows OS. However, if you aren’t able to resolve the issue using the above-mentioned methods or solutions, let us know in the comment section.
Error code 0x800F081F is one of four possible error codes that all point to the same underlying issue. The other three are error code 0x800F0906, error code 0x800F0907, and error code 0x800F0922.
Microsoft .NET Framework 3.5 incompatibilities cause all the error codes. Typically, they will occur when you enable the .NET Framework using either the installation wizard, the Deployment Image Servicing, and Management (DISM) tool, or Windows PowerShell commands.
You will only see the codes on Windows 10, Windows Server 2016, Windows Server version 1709, Windows 8.1, Windows Server 2012 R2, Windows 8, and Windows Server 2012. On those operating systems, Microsoft .NET Framework 3.5 is a “Feature on Demand” (i.e. it is not enabled by default).
When you turn on the feature, Windows Update tries to grab .NET binaries along with other necessary files. If your computer is not correctly configured, you might see the codes.
The post Guide and Methods to Fix Window 10 .Net Framework 3.5 Error appeared first on Tweak Your Biz.
No comments:
Post a Comment